Special “Thank You!” pricing for our brothers and sisters in the Military, Veterans & First Responders (Law Enforcement, Firefighters and EMT).
Are you sure you want to leave checkout?
Go to home page
Featuring Hot Rod Technology inspired by the look and extreme performance of American muscle cars, the PXG 0811 XF GEN2 Golf Driver is designed for out-and-out forgiveness and raw power.
The 0811 XF GEN2 Driver presents the same performance-enhancing technology as the 0811 X GEN2 Driver, with a deeper CG location and a weight back design. This promotes mid-spin performance and increases the MOI.
Five weight ports in the sole support trajectory tuning and create the opportunity for the overall assembled mass to be adjusted.
Adjustable hosel can change the loft (+/-) 1½ degrees to optimize the trajectory.
Weight back design creates a deep center of gravity (CG) position, producing higher launch conditions and an exceptionally high MOI that teeters on the brink of USGA limits.
See how our 0811 GEN2 Drivers stack up against the competition
The PXG 0811 XF GEN2 Driver features a multi-level, variable thickness carbon fiber crown design. The stiff carbon fiber construction reduces energy loss, yielding faster ball speeds, and helps reinforce the face structure for improved consistency.
The dynamic visual styling of the crown, including a high-performance anti-glare finish, eliminates distractions at address, subliminally aids alignment for more centered and consistent ball striking and enhances aerodynamics.
The carbon fiber crown saves approximately 15 grams of mass from the top of the club head that can be redistributed in the sole, helping to lower the CG position and optimize ball flight.
The high-strength titanium alloy face used in the 0811 XF GEN2 Driver supports a thin face construction. The variable design further optimizes the face to promote faster ball speeds.
The 0811 X GEN2 Driver is designed with a honeycomb TPE insert. TPE, also used in PXG GEN1 Irons and Drivers, is a high-performance vibration-dampening polymer that enhances the golf club’s sound and feel. The honeycomb structure helps reduce the mass of the dampening structure, allowing for more weight to be repositioned around the sole of the club to optimize launch conditions.
Precision Weighting Technology distributes club head mass through a series of weights to increase MOI. The 0811 XF GEN2 Driver has interchangeable high-density tungsten weights (4.1g or 2.5g) and low-density titanium weights (0.8g), allowing for a head weight that is adjustable between 195-217 grams. Fine-tuning will alter the initial launch conditions allowing the golfer to achieve the best possible results without changing his or her swing.
This weight distribution positions the mass toward the heel of the club head in a draw biased setting to help players square the club face more easily.
This weight distribution positions the mass towards the toe of the club head to maximize the MOI and shift the club from a draw bias to a more neutral directional setting.
Important Notice: If you'd like expert assistance over the phone to "dial in" your PXG equipment, please call our PXG Fitting Experts at 1.844.PLAY.PXG. Our team is available to you weekdays from 6am-6pm Arizona Time, Saturdays 7am-6pm and Sundays 7am-4pm. PXG Clubs are sold with a 30-day money-back guarantee less shipping and a 10% restocking fee.
Club Weight Configuration
US Pricing OnlyMore Info
If you would like our advice to perfect your fitting, please call our PXG Fitting Experts at 1.844.PLAY.PXG
Loft: Loft is the angle measured between the face and a vertical plane. Stronger lofts will create lower launch angles and spin rates, while weaker lofts will produce a higher launch and spin ball flight. Our irons are designed with loft specifications that fit the majority of players of all levels. We recommend standard loft unless a player has been through a full fitting with a PXG fitter.
Lie: Lie is the angle measured between the shaft and the ground plane at impact. Lie angle is adjusted based on a player’s physical stature as well as his or her swing characteristics to make the head level at impact. If you are not sure what your lie angle should be, we recommend using our full online fitting tool.
Length: Club length is determined by your physical stature as well as your consistency. Generally, longer clubs will add more speed but will also increase the dispersion pattern. If you are not sure what your length should be, we recommend using our full online fitting tool.
For golfers at every level of the game, the original PXG 0311 Irons provide forgiveness where you need it and performance where you want it.
A game improvement iron that offers xtreme forgiveness and superior feel, while maintaining the sleek look of a blade. The larger profile helps build confidence at address.
Inspired by PXG's touring professionals, the 0311T Irons create a more penetrating ball flight and offer xtreme workability for advanced shot making.
GRAPHITE: Graphite iron shafts are vibration dampening, light weight options. They produce a softer feel as well as higher launch and more speed for improved distance.
STEEL: Steel iron shafts are designed to maximize consistency and provide a stable feel for stronger players. Steel shafts are generally heavier than graphite and are available in a variety of weights and stiffness profiles to help optimize your launch conditions.
Butt Frequency and Tip Frequency are two key measurements we use to characterize how a shaft will perform. As the frequencies increase, launch and spin generally decrease. Based on your answers, our Fitting Tool prescribed optimal frequency values for you and found the shaft that matches those specifications most closely.
Nobody makes golf clubs the way we do. Period.®
Please fill in all fields to proceed.